NSN 5305-01-338-6795
High Torque Screw
Retaining element in shank.
Manufacturer part number MS3369B307 for national stock number 5305013386795.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-338-6795.
-
MPN or Model
MS3369B307
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.262 inches and 0.313 inches -
Fastener Length
Between 0.810 inches and 0.830 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.096 inches and 0.110 inches -
Width Between Flats
0.413 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Grip Length
Between 0.438 inches and 0.454 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.731 inches first hole -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-007-1893 MPN MS3470L22-21PWElectrical Receptacle Connector
- 5940-00-034-6942 MPN MS18029-6S-12Terminal Board Cover
- 5950-00-035-4416 MPN MS75083-13Radio Frequency Coil
- 5930-00-036-8716 MPN MS27734-22Toggle Switch
- 5935-00-138-7601 MPN MS18180-1Electrical Connector Insert
- 5935-00-149-3845 MPN MS3106A28-2PElectrical Plug Connector
- 5935-00-161-6724 MPN MS24132-6SElectrical Connector Backshell
- 5935-00-189-2971 MPN MS3102A22-27SElectrical Receptacle Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-338-6795 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369B307 | Military Standards |