NSN 5305-01-338-8159
High Torque Screw
Between 1.266 inches and 1.296 inches fastener length, flat countersunk head style, between 0.826 inches and 0.880 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number NAS587-10 for national stock number 5305013388159.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-338-8159.
-
MPN or Model
NAS587-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.656 inches -
Fastener Length
Between 1.266 inches and 1.296 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.826 inches and 0.880 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8735 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas587 professional/industrial association standard
More from these suppliers
- 5940-01-425-6516 MPN NAS1063A5-449Terminal Board Marker Strip
- 1680-01-517-0717 MPN NAS1338A5C15DAircr Swing Arm Pin
- 5935-00-153-4395 MPN NAS1642R16-24SNElectrical Receptacle Connector
- 5940-01-430-2097 MPN NAS1063B18-37Terminal Board Marker Strip
- 5305-00-007-1558 MPN NAS1100E04-14PMachine Screw
- 5305-00-020-3625 MPN NAS1100C06-6Machine Screw
- 5305-00-052-7492 MPN MS24629-61Tapping Screw
- 5305-00-057-0529 MPN MS51958-47Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-338-8159 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS587-10 | National Aerospace Standards |
Stock Check
- NS: 109
- NE: 684