NSN 5305-01-338-9347
High Torque Screw
Between 0.449 inches and 0.479 inches fastener length, flat countersunk head style, between 0.246 inches and 0.280 inches head diameter, grip diameter: between 0.1365 inches and 0.1375 inches .
Manufacturer part number NAS7401-3 for national stock number 5305013389347.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-338-9347.
-
MPN or Model
NAS7401-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.449 inches and 0.479 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.246 inches and 0.280 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.138 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams 6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas7401 professional/industrial association standard
More from these suppliers
- 5305-00-007-6186 MPN NAS1100E08-22Machine Screw
- 5305-00-007-9882 MPN NAS1100E04-18PMachine Screw
- 5305-00-008-7856 MPN NAS1742C04T6USocket Head Cap Screw
- 5305-00-057-0476 MPN MS24694C111Machine Screw
- 5305-00-086-7865 MPN NAS1631E7Machine Screw
- 5305-00-088-9666 MPN MS24693-C51Machine Screw
- 5305-00-150-3585 MPN NAS583-94Close Tolerance Screw
- 5305-00-185-0239 MPN NAS1101-3-41Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-338-9347 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7401-3 | National Aerospace Standards |