NSN 5305-01-339-2061
High Torque Screw
Between 4.438 inches and 4.468 inches fastener length, flat countersunk head style, between 0.959 inches and 1.017 inches head diameter, grip diameter: between 0.4985 inches and 0.4995 inches .
Manufacturer part number NAS1158-64D for national stock number 5305013392061.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-339-2061.
-
MPN or Model
NAS1158-64D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.453 inches -
Fastener Length
Between 4.438 inches and 4.468 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.959 inches and 1.017 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.500 inches -
Grip Length
Between 3.990 inches and 4.010 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.115 inches first hole -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-8844 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1158 professional/industrial association standard
More from these suppliers
- 5940-00-052-9068 MPN NAS705C3Stud Terminal
- 5305-00-054-9256 MPN MS51047-47Setscrew
- 5305-00-057-3663 MPN NAS1352-6LE12PSocket Head Cap Screw
- 5305-00-101-8600 MPN MS21295-49Socket Head Cap Screw
- 5305-00-115-9407 MPN NAS1100E06-70PMachine Screw
- 5305-00-150-0804 MPN NAS1131E8Close Tolerance Screw
- 5305-00-150-0810 MPN NAS1100C08-46PMachine Screw
- 5305-00-225-7765 MPN MS24673-12Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-339-2061 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1158-64D | National Aerospace Standards |
NAS1158-64D | National Aerospace Standards |
NAS1158-64D | National Aerospace Standards |