NSN 5305-01-339-2274
Bolt Stove
Between 0.281 inches and 0.312 inches fastener length, flat countersunk head style, between 0.195 inches and 0.225 inches head diameter, locking feature: pellet or strip or patch.
Manufacturer part number 115387-51959-14 for national stock number 5305013392274.
Datasheet
-
Product description
Machine Screw NSN 5305-01-339-2274.
-
MPN or Model
115387-51959-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.231 inches -
Fastener Length
Between 0.281 inches and 0.312 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.195 inches and 0.225 inches -
Locking Feature
Pellet or strip or patch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Criticality Code Justification
Zzzy -
Screw Material
Steel comp 301 or steel comp 302 or steel comp 302b or steel comp 303 or steel comp 303se or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 308 or steel comp 309 or steel comp 309s or steel comp 310 or steel comp 310s or steel comp 314 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 347 or steel comp 348 or steel comp 384 or steel comp 385 -
Locking Feature Material
Plastic polyamide -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Special Test Features
Special quality control testing -
Test Data Document
81349-mil-p-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unc -
Reference Number Differentiating Characteristics
As differentiated by material which must conform to ships parts control center special quality control provisions
More from these suppliers
- 5305-01-219-9110 MPN 02071Thumbscrew
- 5305-01-482-6308 MPN 03289-06Hexagon Head Cap Screw
- 5305-01-526-3330 MPN 03327-02Hexagon Head Cap Screw
- 5306-00-460-8547 MPN CIPRD-MS27576-4-22RClose Tolerance Bolt
- 5905-00-827-4692 MPN 562-102HS-20KNonprecision Wire Wound Variable Resistor
- 5905-01-085-3858 MPN 120335-1Film Fixed Resistor
- 5905-01-195-7167 MPN 913342 PIECE 19Adjustable Resistor
- 5930-01-325-0825 MPN 116188-20Rotary Switch
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-339-2274 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
115387-51959-14 | Lockheed Martin Corporation |
LL-HX7-1100 | Defense Logistics Agency |