NSN 5305-01-339-3941
High Torque Screw
Furnished with keyway.
Manufacturer part number CA2193-3-07 for national stock number 5305013393941.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-339-3941.
-
MPN or Model
CA2193-3-07
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.445 inches -
Fastener Length
Between 0.873 inches and 0.893 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.335 inches and 0.381 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Width Across Flats
Between 0.125 inches and 0.127 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-092-6681 MPN CA2651-4-14Close Tolerance Screw
- 5305-01-209-9380 MPN CA28080-3-7PKPanel Screw Assembly
- 5305-01-222-0827 MPN 28080-4-14PPanel Screw Assembly
- 5305-01-272-9979 MPN CA30056-2-3-8-2Panel Screw Assembly
- 5305-01-359-2510 MPN CA2227-08-3-8Machine Screw
- 5306-00-460-8545 MPN CA4510-3-14Close Tolerance Bolt
- 1560-00-150-8713 MPN 36-33514Landing Gear Lo Arm
- 1560-00-241-2368 MPN 285-333308-1Wheel Door Block
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-339-3941 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2193-3-07 | Arconic Global Fasteners & Rings, |
LE111-0002-3007 | Boeing Company, The |
LE111-0002-3007 | Fastener Innovation Technology, Inc. |
CA2193-3-7 | Arconic Global Fasteners & Rings, |