NSN 5305-01-340-0227
High Torque Screw
Between 0.449 inches and 0.479 inches fastener length, flat countersunk head style, between 0.328 inches and 0.337 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number NAS1152E3P for national stock number 5305013400227.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-340-0227.
-
MPN or Model
NAS1152E3P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.449 inches and 0.479 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.337 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1152 professional/industrial association standard
More from these suppliers
- 1680-01-668-8056 MPN NAS354-5-170Aircraft Control Tube Assembly
- 5305-00-008-5890 MPN NAS1102C08-14Machine Screw
- 5305-00-057-0516 MPN MS51958-19Machine Screw
- 5305-00-057-1720 MPN NAS1101-06-7Machine Screw
- 5305-00-104-5082 MPN NAS1352-7LE52PSocket Head Cap Screw
- 5305-00-151-6214 MPN NAS1218-06-8PMachine Screw
- 5305-00-186-9211 MPN NAS1704-26Shoulder Screw
- 5305-00-225-9451 MPN MS16996-31Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-340-0227 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1152E3P | National Aerospace Standards |
Stock Check
- NE: 6733
- NS: 452
- AR: 1