NSN 5305-01-341-1913
High Torque Screw
1.026 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1153E12 for national stock number 5305013411913.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-341-1913.
-
MPN or Model
NAS1153E12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
1.026 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-498-0032 MPN NAS1745-25Conductor Splice
- 5935-01-028-0414 MPN NAS1653R18B32PNElectrical Plug Connector
- 5935-01-256-0827 MPN NAS1678H10B6PNElectrical Plug Connector
- 5940-01-451-2665 MPN NAS1063A10-105BMTerminal Board Marker Strip
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-008-5897 MPN NAS1102C5-14Machine Screw
- 5305-00-056-7859 MPN NAS660HK4-7Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-341-1913 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1153E12 | National Aerospace Standards |