NSN 5305-01-341-8547
High Torque Screw
Between 0.605 inches and 0.635 inches fastener length, flat countersunk head style, between 0.355 inches and 0.397 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS8704-4 for national stock number 5305013418547.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-341-8547.
-
MPN or Model
NAS8704-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 0.605 inches and 0.635 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.355 inches and 0.397 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas8704 professional/industrial association standard
More from these suppliers
- 5305-00-012-8226 MPN MS51851-136Tapping Screw
- 5305-00-036-6759 MPN NAS623-4-58Machine Screw
- 5305-00-052-6912 MPN MS24629-27Tapping Screw
- 5305-00-052-7477 MPN MS24627-69Tapping Screw
- 5305-00-099-7629 MPN NAS1580A3H7DClose Tolerance Screw
- 5305-00-111-0720 MPN NAS1102-3-32Machine Screw
- 5305-00-141-4622 MPN NAS334A13Socket Head Cap Screw
- 5305-00-174-8711 MPN NAS1216-3C18Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-341-8547 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS8704-4 | National Aerospace Standards |