NSN 5305-01-342-4945
High Torque Screw
Grip chamfem at threads 35.0 degrees.
Manufacturer part number SC2657-4-6P for national stock number 5305013424945.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-342-4945.
-
MPN or Model
SC2657-4-6P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.365 inches -
Fastener Length
Between 0.855 inches and 0.885 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches grip32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-005-0648 MPN 51B222-10Close Tolerance Screw
- 5305-00-345-2352 MPN ST3M455-10L12Close Tolerance Screw
- 5305-01-085-3882 MPN HT4009-3-9Shoulder Screw
- 5305-01-158-5372 MPN SC2163-3-12Machine Screw
- 5305-01-209-9325 MPN SCI785T-04-06Machine Screw
- 5305-01-356-2534 MPN LD111-0047-0507Close Tolerance Screw
- 5305-01-406-3078 MPN ST3M733-4L-9Close Tolerance Screw
- 5305-01-417-2490 MPN 3M1169V-3-14Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-342-4945 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC2657-4-6P | Arconic Global Fasteners & Rings, |
123369-4-6P | Sps Technologies, Llc |
S00464-4-6P | Boeing Company, The |