NSN 5305-01-342-8579
High Torque Screw
Between 1.097 inches and 1.144 inches fastener length, flat countersunk head style, between 0.464 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number PBF1475-4-11 for national stock number 5305013428579.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-342-8579.
-
MPN or Model
PBF1475-4-11
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 1.097 inches and 1.144 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-316-7343 MPN ST3M454-3L5Close Tolerance Screw
- 5305-01-171-0555 MPN ST3M455-3L21Close Tolerance Screw
- 5305-01-435-6482 MPN BACB30LU9-24Close Tolerance Screw
- 5305-01-435-6482 MPN BACB30LU9-24Close Tolerance Screw
- 5305-01-574-4122 MPN 3M1170V4-11AClose Toleran Screw
- 5306-00-958-9162 MPN MS21250-06032Shear Bolt
- 5306-01-027-1995 MPN VAL23033-3-9Close Tolerance Bolt
- 5306-01-137-1788 MPN VEP220121-5F18Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-342-8579 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1475-4-11 | Sps Technologies, Llc |
GB510FG4-11 | Northrop Grumman Systems Corporation |
GB510FG4-11 | Sps Technologies, Llc |
VCL0009-4-11 | Valley-todeco, Inc. |
Stock Check
- NE: 508
- NS: 3