NSN 5305-01-342-8581
High Torque Screw
Between 1.035 inches and 1.065 inches fastener length, flat countersunk head style, between 0.3898 inches and 0.3908 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 7S39-4-10 for national stock number 5305013428581.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-342-8581.
-
MPN or Model
7S39-4-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 1.035 inches and 1.065 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.3898 inches and 0.3908 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.872 inches first hole -
Material
Steel comp 4130 -
Material Specification
Mil-s-6758 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1680-00-123-3163 MPN 180-53021-3Ejection Seat Fitting
- 1560-00-304-9771 MPN 170-52023-1Bracket And Pulley Assembly
- 4920-00-653-8933 MPN E5101Fan Clutch Control
- 1680-00-658-2678 MPN 223-52383-11Reaction Cylinder Assembly
- 1560-00-770-3331 MPN 202-681006-2Aircraft Structural Component Support
- 1560-00-859-7123 MPN 265-318083Window Pin Assembly
- 1680-00-966-9925 MPN 6016-9Ba Cushion Assembly
- 5985-01-135-2653 MPN LE413-0274-035Waveguide Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-342-8581 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7S39-4-10 | Boeing Company, The |
7539-4-10 | Boeing Company, The |