NSN 5305-01-342-9432
High Torque Screw
0.715 inches fastener length, flat countersunk head style, offset cruciform (torque set) internal drive style, thread diameter: 0.250 inches.
Manufacturer part number 7002820-5 for national stock number 5305013429432.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-342-9432.
-
MPN or Model
7002820-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.435 inches -
Fastener Length
0.715 inches -
Head Style
Flat countersunk -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel comp 4140 -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-284-8584 MPN 9580231BThermal Resistor
- 5950-00-337-6284 MPN 984727-1BPower Transformer
- 5905-00-542-7649 MPN 4171786-184Nonprecision Nonwire Wound Variable Resistor
- 5905-00-577-1827 MPN 84353-032Inductive Wire Wound Fixed Resistor
- 5945-00-683-4818 MPN 950031-5Electromagnetic Relay
- 5935-00-800-7368 MPN 710099-082Electrical Connector Backshell
- 5945-00-812-3697 MPN 951600-22Thermal Relay
- 5950-01-009-8539 MPN 984749-1CAudio Frequency Transformer
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-342-9432 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7002820-5 | Raytheon Company |
10113704 | Nimikkeistokeskus Ncb Finland |
Stock Check
- NS: 76
- NE: 10803