NSN 5305-01-343-1165
High Torque Screw
Between 0.534 inches and 0.564 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1580A3R2D for national stock number 5305013431165.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-343-1165.
-
MPN or Model
NAS1580A3R2D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.362 inches -
Fastener Length
Between 0.534 inches and 0.564 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.190 inches -
Grip Length
Between 0.177 inches and 0.197 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.408 inches first hole and 0.458 inches first hole -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-046-5338 MPN NAS1745-8Conductor Splice
- 1680-01-524-1333 MPN NAS1375A04SB07Aircr Air Duct Hose
- 5305-00-007-1556 MPN NAS1100C02-3PMachine Screw
- 5305-00-021-7245 MPN NAS1101-3H9Machine Screw
- 5305-00-066-8535 MPN MS27039-4-21Machine Screw
- 5305-00-083-4620 MPN MS24671-84Socket Head Cap Screw
- 5305-00-102-4552 MPN MS27039-4-44Close Tolerance Screw
- 5305-00-235-5775 MPN NAS1101-06H8Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-343-1165 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A3R2D | National Aerospace Standards |