NSN 5305-01-346-2268
High Torque Screw
Between 1.111 inches and 1.141 inches fastener length, flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 121557 L4-A10 for national stock number 5305013462268.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-346-2268.
-
MPN or Model
121557 L4-A10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.430 inches and 0.501 inches -
Fastener Length
Between 1.111 inches and 1.141 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-080-0152 MPN 3MA334CFA5Machine Screw
- 5305-00-082-1897 MPN 3MA509-10R9Machine Screw
- 5305-00-316-7630 MPN AIC812-04-3Machine Screw
- 5305-00-419-0861 MPN NAS1101-6-10WMachine Screw
- 5305-00-486-2320 MPN AIC82-5-6Close Tolerance Screw
- 5305-00-840-5962 MPN AIC617-1Externally Relieved Body Screw
- 5305-00-927-1989 MPN AIC1652-3-12Close Tolerance Screw
- 5305-00-934-9854 MPN AIC811-6-38Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-346-2268 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121557 L4-A10 | Sps Technologies, Llc |
C7984-L4-10 | Sps Technologies, Llc |
VT1693FL410 | Arconic Global Fasteners & Rings, |
PBF1165-L410 | Sps Technologies, Llc |
VT1693FL410 | Alcoa Global Fasteners, Inc. |
C7984-L4-10 | Lockheed Martin Corporation |
H044-L410 | Huck International, Inc. |
C7984-L4-10 | Sps Technologies, Llc |
H044-L410 | Huck Intl Inc |
AIC984-L410 | Sps Technologies, Llc |