NSN 5305-01-346-8585
High Torque Screw
Between 0.910 inches and 0.940 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number E008-4-8 for national stock number 5305013468585.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-346-8585.
-
MPN or Model
E008-4-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 0.910 inches and 0.940 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response or ams 5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-186-9221 MPN AIC82-4-30Close Tolerance Screw
- 5305-00-508-2718 MPN A1C551C3-708Shoulder Screw
- 5305-00-803-9617 MPN 51B221-13Close Tolerance Screw
- 5305-00-928-9635 MPN A1C82-5-15Machine Screw
- 5305-01-004-9496 MPN AIC812-08-7Machine Screw
- 5305-01-158-6763 MPN AIC944-3-16Machine Screw
- 5305-01-236-6192 MPN AIC9535-7-19Close Tolerance Screw
- 5305-01-259-9764 MPN AIC984-3-5PRClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-346-8585 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
E008-4-8 | Huck International, Inc. |
AIC1651-4-8 | Sps Technologies, Llc |
SC3103-4-8 | Arconic Global Fasteners & Rings, |
PBF1416-4-8 | Sps Technologies, Llc |
HR239-4-8 | Hi-shear Corporation |
123742-4-8 | Sps Technologies, Llc |
HR239-4-8 | Lisi Aerospace Canada Corp |
SLB216-4-8 | Space-lok, Inc. |
03A173-4-8 | Northrop Grumman Systems Corporation |
BF0015HC3-4-8 | Lfc Industries Inc. |
03A173-4-8 | Northrop Grumman Systems Corporation |
E008-4-8 | Huck Intl Inc |