NSN 5305-01-347-0664
High Torque Screw
Between 1.438 inches and 1.468 inches fastener length, flat countersunk head style, between 0.832 inches and 0.890 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number NAS1157E16D for national stock number 5305013470664.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-347-0664.
-
MPN or Model
NAS1157E16D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.453 inches -
Fastener Length
Between 1.438 inches and 1.468 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.832 inches and 0.890 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.329 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1157 professional/industrial association standard
More from these suppliers
- 5940-01-351-3864 MPN NAS1063A15-10SCTerminal Board
- 5940-01-382-0217 MPN NAS1063B216-225Terminal Board Marker Strip
- 5305-00-007-6207 MPN NAS1393E00-3Machine Screw
- 5305-00-007-9896 MPN NAS1102E04-26PMachine Screw
- 5305-00-058-9375 MPN MS51977-42Setscrew
- 5305-00-059-8226 MPN MS35214-1Machine Screw
- 5305-00-069-5578 MPN MS90725-94Hexagon Head Cap Screw
- 5305-00-079-7975 MPN MS24694S193Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-347-0664 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1157E16D | National Aerospace Standards |