NSN 5305-01-347-8145
High Torque Screw
Between 0.766 inches and 0.796 inches fastener length, flat countersunk head style, between 0.575 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number CHT4057-5-6 for national stock number 5305013478145.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-347-8145.
-
MPN or Model
CHT4057-5-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
Between 0.766 inches and 0.796 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.575 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Features Provided
Cetyl alcohol lubricant -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488 type 2 cl 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-354-4584 MPN HT4024L3-8Close Tolerance Screw
- 5305-00-416-2857 MPN HT8039-3-8Close Tolerance Screw
- 5305-00-503-5695 MPN LS15234C4-3Close Tolerance Screw
- 5305-00-510-5279 MPN 15264V008-5Machine Screw
- 5305-00-510-5285 MPN 15263V3-10Machine Screw
- 5305-00-541-9344 MPN HT4025L4D14Close Tolerance Screw
- 5305-01-042-6317 MPN HT8138-3-19TClose Tolerance Screw
- 5305-01-045-2539 MPN ST3M506-4-4-1Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-347-8145 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CHT4057-5-6 | Arconic Global Fasteners & Rings, |
HT4057-5-6 | Hi-shear Corporation |
HT4057-5-6 | Lisi Aerospace Canada Corp |
HT4057-5-6 | Sps Technologies, Llc |
HT4057-5-6 | Huck International, Inc. |
HT4057-5-6 | Alcoa Global Fasteners, Inc. |
CHT4057-5-6 | Deutsch Co The |
CHT4057-5-6 | Sps Technologies, Llc |
CHT4057-5-6 | Alcoa Global Fasteners, Inc. |