NSN 5305-01-347-9809
High Torque Screw
Between 1.304 inches and 1.334 inches fastener length, flat countersunk head style, between 0.577 inches and 0.695 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number HR242-5-12P for national stock number 5305013479809.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-347-9809.
-
MPN or Model
HR242-5-12P
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.304 inches and 1.334 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.695 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-497-0842 MPN 3M1170C3-9AClose Tolerance Screw
- 5305-01-512-8364 MPN 3M1170C4-18AClose Tolerance Screw
- 5306-00-503-5693 MPN VAL23611-6D046Close Tolerance Bolt
- 5306-01-023-2975 MPN ST3M571-4-22Shear Bolt
- 5306-01-054-3416 MPN C7521-4-10Shear Bolt
- 5306-01-059-8673 MPN C4356N6D1563Shoulder Bolt
- 5306-01-065-6308 MPN VCG0009-8-26Close Tolerance Bolt
- 5306-01-132-1061 MPN ST3M744-10D32Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-347-9809 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR242-5-12P | Hi-shear Corporation |
HR242-5-12P | Lisi Aerospace Canada Corp |
AIC4410-5-12P | Sps Technologies, Llc |
VCL0008-5-12P | Valley-todeco, Inc. |
SLB217-5-12P | Space-lok, Inc. |
X007-5-12P | Huck International, Inc. |
03A161-5-12P | Northrop Grumman Systems Corporation |
PBF1419-5-12P | Sps Technologies, Llc |
123471-5-12P | Sps Technologies, Llc |
X007-5-12P | Huck Intl Inc |