NSN 5305-01-348-2684
High Torque Screw
Between 2.953 inches and 2.999 inches fastener length, hexagon head style, between 0.265 inches and 0.297 inches head height, width between flats: between 0.740 inches and 0.752 inches .
Manufacturer part number AN178C27A for national stock number 5305013482684.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-348-2684.
-
MPN or Model
AN178C27A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.781 inches -
Fastener Length
Between 2.953 inches and 2.999 inches -
Head Style
Hexagon -
Head Height
Between 0.265 inches and 0.297 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Grip Diameter
Between 0.4986 inches and 0.4991 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.500 inches -
Grip Length
Between 2.187 inches and 2.202 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-192-1383 MPN AN3108B20-7PElectrical Plug Connector
- 5935-00-258-3875 MPN AN3100A24-11PElectrical Receptacle Connector
- 5935-00-258-4838 MPN AN3101A28-21PElectrical Plug Connector
- 5935-00-283-3394 MPN AN3057-12AElectrical Connector Cable Clamp
- 5935-00-552-3046 MPN AN3108B20-29SWCElectrical Plug Connector
- 5305-00-151-0366 MPN AN500A8-7Machine Screw
- 5305-00-151-0677 MPN AN526-632-26Machine Screw
- 5305-00-167-2916 MPN AN5316R12Tapping Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-348-2684 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN178C27A | Aeronautical Standards Group |