NSN 5305-01-348-7812
High Torque Screw
Between 0.580 inches and 0.610 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.885 inches and 0.895 inches .
Manufacturer part number E008-3-4P for national stock number 5305013487812.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-348-7812.
-
MPN or Model
E008-3-4P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 0.580 inches and 0.610 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.885 inches and 0.895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response or ams 5731 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-079-1675 MPN 3MA335CFA6-5Machine Screw
- 5305-00-146-7177 MPN AIC1023V6-23Close Tolerance Screw
- 5305-00-685-1889 MPN 314231Machine Screw
- 5305-00-802-0578 MPN 51B221-13HMachine Screw
- 5305-01-022-9611 MPN LS15264V08-7Machine Screw
- 5305-01-207-7518 MPN BACS12CK3-37Machine Screw
- 5305-01-303-5637 MPN AIC1147-3-4Close Tolerance Screw
- 5305-01-500-8240 MPN TX1027D3-5AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-348-7812 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
E008-3-4P | Huck International, Inc. |
PBF1416-3-4P | Sps Technologies, Llc |
AIC1651-3-4P | Sps Technologies, Llc |
SC3103-3-4P | Arconic Global Fasteners & Rings, |
HR239-3-4P | Hi-shear Corporation |
HR239-3-4P | Lisi Aerospace Canada Corp |
SLB216-3-4P | Space-lok, Inc. |
03A173-3-4P | American-marsh Pumps Inc |
E008-3-4P | Huck Intl Inc |
03A173-3-4P | Northrop Grumman Systems Corporation |
BF0015HC3A-3-4 | Lfc Industries Inc. |
123742-3-4P | Sps Technologies, Llc |