NSN 5305-01-349-4195
High Torque Screw
Between 1.453 inches and 1.500 inches fastener length, flat countersunk head style, between 0.578 inches and 0.633 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number GB510FG5-16 for national stock number 5305013494195.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-349-4195.
-
MPN or Model
GB510FG5-16
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
A3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.453 inches and 1.500 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.633 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.312 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-032-3465 MPN LS15264-06-7Machine Screw
- 5305-01-214-7896 MPN BACB30LU9-20Close Tolerance Screw
- 5306-00-059-1203 MPN 3M33-3-33Close Tolerance Bolt
- 5306-00-357-1829 MPN VAL23029-7D24Close Tolerance Bolt
- 5306-00-466-0740 MPN VAL23611-5D016Close Tolerance Bolt
- 5306-00-905-8449 MPN MS21250-05024Shear Bolt
- 5306-00-958-8385 MPN STSBG003A12U024Close Tolerance Bolt
- 5306-01-342-2716 MPN VCJ0002-4-48DShear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-349-4195 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB510FG5-16 | Northrop Grumman Systems Corporation |
GB510FG5-16 | Valley-todeco, Inc. |
GB510FG5-16 | Sps Technologies, Llc |
GB510FG5-16 | Sps Technologies, Llc |
PBF1475-5-16 | Sps Technologies, Llc |
VCL0009-5-16 | Valley-todeco, Inc. |
124379-5-16 | Sps Technologies, Llc |
GB510FG5-16 | Northrop Grumman Systems Corporation |
VCL0009-5-16 | Valley-todeco, Inc. |
PBF1475-5-16 | Sps Technologies, Llc |
124379-5-16 | Sps Technologies, Llc |