NSN 5305-01-349-5019
High Torque Screw
Between 0.511 inches and 0.541 inches fastener length, flat countersunk head style, between 0.327 inches and 0.329 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number NAS1972C3T for national stock number 5305013495019.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-349-5019.
-
MPN or Model
NAS1972C3T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
Between 0.511 inches and 0.541 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.327 inches and 0.329 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Stainless steel -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1972 professional/industrial association standard
More from these suppliers
- 5305-00-045-7600 MPN MS35198-61Machine Screw
- 5305-00-052-6879 MPN MS24627-55Tapping Screw
- 5305-00-057-0524 MPN MS51958-28Machine Screw
- 5305-00-103-2072 MPN NASM35307 P/N MS35307 -419Hexagon Head Cap Screw
- 5305-00-119-7575 MPN NAS1633-42Machine Screw
- 5305-00-197-2355 MPN NAS340CPA20Close Tolerance Screw
- 5305-00-235-0315 MPN NAS1100E06-7Machine Screw
- 5305-00-250-9516 MPN NAS1183-15Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-349-5019 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1972C3T | National Aerospace Standards |