NSN 5305-01-349-6107
High Torque Screw
Between 0.672 inches and 0.702 inches fastener length, pan head style, between 0.597 inches and 0.612 inches head diameter, head height: between 0.176 inches and 0.183 inches .
Manufacturer part number NAS1578A5H3 for national stock number 5305013496107.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-349-6107.
-
MPN or Model
NAS1578A5H3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.501 inches -
Fastener Length
Between 0.672 inches and 0.702 inches -
Head Style
Pan -
Head Diameter
Between 0.597 inches and 0.612 inches -
Head Height
Between 0.176 inches and 0.183 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.177 inches and 0.197 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1578 professional/industrial association standard
More from these suppliers
- 5905-01-160-8642 MPN NAS1330S6E-381Resistance Element
- 1680-01-479-7276 MPN NAS354-5-1488Rod
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-059-3669 MPN MS51958-73Machine Screw
- 5305-00-059-7042 MPN NAS498Close Tolerance Screw
- 5305-00-061-0217 MPN NAS1081C3A5LSetscrew
- 5305-00-068-0479 MPN MS35199-76Machine Screw
- 5305-00-069-4943 MPN NAS2806-16Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-349-6107 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578A5H3 | National Aerospace Standards |
NAS1218-5-3P | National Aerospace Standards |