NSN 5305-01-349-6141
High Torque Screw
Between 3.948 inches and 3.978 inches fastener length, flat chamfer head style, between 0.306 inches and 0.313 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS1123-59 for national stock number 5305013496141.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-349-6141.
-
MPN or Model
NAS1123-59
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 3.948 inches and 3.978 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.306 inches and 0.313 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 3.968 inches and 3.988 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1123 professional/industrial association standard
More from these suppliers
- 5940-01-372-2501 MPN NAS1063B-21-40Terminal Board Marker Strip
- 5940-01-384-3971 MPN NAS1063D2-2Terminal Board Marker Strip
- 5305-00-053-0614 MPN NAS1100C04-22Machine Screw
- 5305-00-054-9256 MPN MS51047-47Setscrew
- 5305-00-059-3657 MPN NASM51958Machine Screw
- 5305-00-088-8330 MPN MS35207-241Machine Screw
- 5305-00-116-1539 MPN NAS1352C08-20Socket Head Cap Screw
- 5305-00-205-3463 MPN NAS1351-4H10Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-349-6141 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1123-59 | National Aerospace Standards |