NSN 5305-01-349-7654
High Torque Screw
Between 0.848 inches and 0.878 inches fastener length, flat countersunk head style, between 0.486 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number AIC1658-4-7 for national stock number 5305013497654.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-349-7654.
-
MPN or Model
AIC1658-4-7
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 0.848 inches and 0.878 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.486 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Four spanner -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4928 assn standard single material response or ams4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-146-7190 MPN AIC1023V5-7Close Tolerance Screw
- 5305-00-151-7974 MPN CVC241-3-16Machine Screw
- 5305-01-069-2728 MPN NAS1101E3-12Machine Screw
- 5305-01-141-7905 MPN HT4020-6-20AXShoulder Screw
- 5305-01-168-9201 MPN LD111-0047-0303Close Tolerance Screw
- 5305-01-266-8381 MPN LD111-0044-2303Close Tolerance Screw
- 5305-01-303-6352 MPN AIC939-3-6PClose Tolerance Screw
- 5305-01-330-7092 MPN AIC1652-3-15AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-349-7654 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC1658-4-7 | Sps Technologies, Llc |
12398-4-7 | Sps Technologies, Llc |
03A200-4-7 | Northrop Grumman Systems Corporation |
SC3105-4-7 | Arconic Global Fasteners & Rings, |
SLB189-4-7 | Space-lok, Inc. |
03A200-4-7 | Northrop Grumman Systems Corporation |
12398-4-7 | Sps Technologies Inc |