NSN 5305-01-349-9582
High Torque Screw
Between 1.687 inches and 1.734 inches fastener length, flat countersunk head style, between 0.717 inches and 0.760 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number GB510FG6-18 for national stock number 5305013499582.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-349-9582.
-
MPN or Model
GB510FG6-18
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
Between 1.687 inches and 1.734 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.717 inches and 0.760 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.375 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-046-2081 MPN ST3M495-6-8Shoulder Screw
- 5305-01-435-0183 MPN BACB30LU14-49Close Tolerance Screw
- 5305-01-435-5528 MPN BACB30LU8-23Close Tolerance Screw
- 5305-01-547-1638 MPN ST3M557-7-15Close Tolerance Screw
- 5305-01-563-3843 MPN ST3M557-6-5Close Tolerance Screw
- 5306-00-205-3521 MPN VFK100G-05052Shear Bolt
- 5306-00-503-5693 MPN VAL23611-6D046Close Tolerance Bolt
- 5306-00-541-9490 MPN VAL23029-6D19Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-349-9582 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB510FG6-18 | Northrop Grumman Systems Corporation |
GB510FG REV B | Northrop Grumman Systems Corporation |
VCL0009-6-18 | Valley-todeco, Inc. |
GB510FG6-18 | Valley-todeco, Inc. |
GB510FG6-18 | Sps Technologies, Llc |
GB510FG6-18 | Sps Technologies, Llc |
PBF1475-6-18 | Sps Technologies, Llc |
124379-6-18 | Sps Technologies, Llc |