NSN 5305-01-350-6871
High Torque Screw
Between 1.500 inches and 1.547 inches fastener length, flat countersunk head style, between 0.717 inches and 0.760 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number GB510FG6-15 for national stock number 5305013506871.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-350-6871.
-
MPN or Model
GB510FG6-15
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
Between 1.500 inches and 1.547 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.717 inches and 0.760 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.375 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-106-3860 MPN 3M926-5L10Close Tolerance Screw
- 5305-01-185-7160 MPN BACB30LU4-26Close Tolerance Screw
- 5305-01-386-2540 MPN VCL0009-3-14Machine Screw
- 5305-01-435-3461 MPN BACB30LU7-23Close Tolerance Screw
- 5305-01-462-2737 MPN 3M1169V5-11AClose Tolerance Screw
- 5306-01-084-1143 MPN VAL23033-7-19XShoulder Bolt
- 5306-01-117-2397 MPN VCG001-10D68Close Tolerance Bolt
- 5306-01-142-2898 MPN ST3M507-8D39Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-350-6871 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB510FG6-15 | Sps Technologies, Llc |
GB510FG6-15 | Northrop Grumman Systems Corporation |
PBF1475-6-15 | Sps Technologies, Llc |
VCL0009-6-15 | Valley-todeco, Inc. |
124379-6-15 | Sps Technologies, Llc |