NSN 5305-01-351-4319
High Torque Screw
Between 1.160 inches and 1.190 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 03A161-4-12 for national stock number 5305013514319.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-351-4319.
-
MPN or Model
03A161-4-12
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 1.160 inches and 1.190 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-01-004-9528 MPN ST3M557-3-3Close Tolerance Screw
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-406-3080 MPN 3M925C3-4AClose Tolerance Screw
- 5305-01-512-8359 MPN 3M1170C5-18AClose Tolerance Screw
- 5305-01-521-9556 MPN ST3M557-3-13Close Tolerance Screw
- 5306-00-142-4907 MPN 4J33042-101BShoulder Bolt
- 5306-00-990-2872 MPN VFK100G-06046Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-351-4319 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A161-4-12 | Northrop Grumman Systems Corporation |
SLB217-4-12 | Space-lok, Inc. |
03A161-4-12 | Northrop Grumman Systems Corporation |
VCL0008-4-12 | Valley-todeco, Inc. |
AIC4410-4-12 | Sps Technologies, Llc |
PBF1419-4-12 | Sps Technologies, Llc |
HR242-4-12 | Hi-shear Corporation |
123741-4-12 | Sps Technologies, Llc |
X007-4-12 | Huck International, Inc. |
HR242-4-12 | Lisi Aerospace Canada Corp |
X007-4-12 | Huck Intl Inc |