NSN 5305-01-352-0630
High Torque Screw
Between 1.949 inches and 1.979 inches fastener length, flat countersunk head style, between 1.214 inches and 1.272 inches head diameter, grip diameter: between 0.6230 inches and 0.6240 inches .
Manufacturer part number NAS1980-17H for national stock number 5305013520630.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-352-0630.
-
MPN or Model
NAS1980-17H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.877 inches and 0.927 inches -
Fastener Length
Between 1.949 inches and 1.979 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.214 inches and 1.272 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.625 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
18 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-007-6178 MPN NAS1100E02-13Machine Screw
- 5305-00-008-2104 MPN NAS1100E02-6PMachine Screw
- 5305-00-045-7943 MPN MS35198-5Machine Screw
- 5305-00-057-0535 MPN MS51958-51Machine Screw
- 5305-00-097-4534 MPN NAS1221-3E14Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-352-0630 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1980-17H | National Aerospace Standards |
Stock Check
- NE: 198