NSN 5305-01-352-0631
High Torque Screw
Between 2.501 inches and 2.531 inches fastener length, flat countersunk head style, between 0.704 inches and 0.762 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS1976-31H for national stock number 5305013520631.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-352-0631.
-
MPN or Model
NAS1976-31H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.553 inches and 0.603 inches -
Fastener Length
Between 2.501 inches and 2.531 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.704 inches and 0.762 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 1.928 inches and 1.948 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-054-9250 MPN MS51045-23Setscrew
- 5305-00-086-9074 MPN NAS1081-06B5LSetscrew
- 5305-00-119-4668 MPN MS27039-6-16Machine Screw
- 5305-00-143-2059 MPN NAS1352C8LN48Socket Head Cap Screw
- 5305-00-143-2060 MPN NAS1352&6LN10PSocket Head Cap Screw
- 5305-00-149-8613 MPN MS51862-24CTapping Screw
- 5305-00-155-4769 MPN MS35190-336Machine Screw
- 5305-00-172-4182 MPN NASM21097-3004Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-352-0631 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1976-31H | National Aerospace Standards |