NSN 5305-01-352-1211
High Torque Screw
Between 4.267 inches and 4.297 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number VCL0008-5-61 for national stock number 5305013521211.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-352-1211.
-
MPN or Model
VCL0008-5-61
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 4.267 inches and 4.297 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 4.272 inches and 4.292 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-508-2733 MPN LS15262V3-20Machine Screw
- 5305-01-338-9348 MPN BACB30NN4S17Close Tolerance Screw
- 5306-00-280-3333 MPN VAL23033-6D14Shear Bolt
- 5306-00-900-2522 MPN VFK100G-06066Shear Bolt
- 5306-00-945-0556 MPN GB511C8-16Shear Bolt
- 5306-01-017-3650 MPN VFK100G-06035Shear Bolt
- 5306-01-044-2982 MPN VAL23607-3-21Shoulder Bolt
- 5306-01-044-7456 MPN VAL23607-3-13Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-352-1211 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCL0008-5-61 | Valley-todeco, Inc. |
AIC4410-5-61 | Sps Technologies, Llc |
PBF1419-5-61 | Sps Technologies, Llc |
123741-5-61 | Sps Technologies, Llc |
HR242-5-61 | Hi-shear Corporation |
HR242-5-61 | Lisi Aerospace Canada Corp |
SLB217-5-61 | Space-lok, Inc. |
X007-5-61 | Huck International, Inc. |
03A161-5-61 | Northrop Grumman Systems Corporation |
X007-5-61 | Huck Intl Inc |