NSN 5305-01-352-1214
High Torque Screw
Between 4.392 inches and 4.422 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number HR239-5-63 for national stock number 5305013521214.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-352-1214.
-
MPN or Model
HR239-5-63
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 4.392 inches and 4.422 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 3.928 inches and 3.948 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-6212 MPN AIC617-14Externally Relieved Body Screw
- 5305-00-235-0393 MPN NAS1101E02-6Machine Screw
- 5305-00-507-2295 MPN LS15262V3-3Machine Screw
- 5305-00-827-7963 MPN 593111Machine Screw
- 5305-01-095-5706 MPN AIC870-3-8Socket Head Cap Screw
- 5305-01-158-5372 MPN AIC940-3-12Machine Screw
- 5305-01-356-3154 MPN 1238-3-2Machine Screw
- 5305-01-359-1335 MPN AIC4488-3-6Panel Fastener Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-352-1214 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR239-5-63 | Hi-shear Corporation |
HR239-5-63 | Lisi Aerospace Canada Corp |
SLB216-5-63 | Space-lok, Inc. |
E008-5-63 | Huck International, Inc. |
03A173-5-63 | Northrop Grumman Systems Corporation |
BF0015HC3-5-63 | Lfc Industries Inc. |
AIC1651-5-63 | Sps Technologies, Llc |
SC3103-5-63 | Arconic Global Fasteners & Rings, |
PBF1416-5-63 | Sps Technologies, Llc |
123742-5-63 | Sps Technologies, Llc |
E008-5-63 | Huck Intl Inc |