NSN 5305-01-352-1215
High Torque Screw
Between 1.285 inches and 1.315 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number X007-4-14 for national stock number 5305013521215.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-352-1215.
-
MPN or Model
X007-4-14
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 1.285 inches and 1.315 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-386-2540 MPN VCL0009-3-14Machine Screw
- 5305-01-435-3891 MPN BACB30LU7-43Close Tolerance Screw
- 5305-01-462-2861 MPN 3M1169V3-8AClose Tolerance Screw
- 5306-01-043-5721 MPN VEP220121-5FH12Shear Bolt
- 5306-01-051-4323 MPN C4356N5D6360Shoulder Bolt
- 5306-01-054-2505 MPN VAL22033-5-16Shear Bolt
- 5306-01-054-2516 MPN BACB30NE6D18Shear Bolt
- 5306-01-056-5443 MPN BACB30LM5-15Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-352-1215 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
X007-4-14 | Huck International, Inc. |
HR242-4-14 | Valley-todeco, Inc. |
AIC4410-4-14 | Sps Technologies, Llc |
PBF1419-4-14 | Sps Technologies, Llc |
123741-4-14 | Sps Technologies, Llc |
03A161-4-14 | Northrop Grumman Systems Corporation |
VCL0008-4-14 | Sps Technologies, Llc |
SLB217-4-14 | Space-lok, Inc. |
03A161-4-14 | Northrop Grumman Systems Corporation |
03A161-4-14 | Hi-shear Corporation |
03A161-4-14 | Lisi Aerospace Canada Corp |
X007-4-14 | Huck Intl Inc |