NSN 5305-01-352-2076
High Torque Screw
Between 1.205 inches and 1.235 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number AIC1651-3-14 for national stock number 5305013522076.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-352-2076.
-
MPN or Model
AIC1651-3-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 1.205 inches and 1.235 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-242-4784 MPN AIC812-04-9Machine Screw
- 5305-01-050-9001 MPN AIC984-3-9Close Tolerance Screw
- 5305-01-158-5371 MPN 3M893-3-9Machine Screw
- 5305-01-168-9201 MPN LD111-0047-0303Close Tolerance Screw
- 5305-01-381-5721 MPN AIC1652-4-33Close Tolerance Screw
- 5305-01-417-4028 MPN AIC4040-3-17Close Tolerance Screw
- 5305-01-462-2753 MPN TX1027D3-8AClose Tolerance Screw
- 5305-01-504-0534 MPN BACB30LH3U3Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-352-2076 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC1651-3-14 | Sps Technologies, Llc |
SC3103-3-14 | Arconic Global Fasteners & Rings, |
PBF1416-3-14 | Sps Technologies, Llc |
123742-3-14 | Sps Technologies, Llc |
BF0015HC3-3-14 | Lfc Industries Inc. |
HR239-3-14 | Hi-shear Corporation |
03A173-3-14 | Northrop Grumman Systems Corporation |
HR239-3-14 | Lisi Aerospace Canada Corp |
E0008-3-14 | Huck Intl Inc |
SLB216-3-14 | Space-lok, Inc. |
E0008-3-14 | Huck International, Inc. |