NSN 5305-01-352-2077
High Torque Screw
Between 1.766 inches and 1.796 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number 03A161-5-21 for national stock number 5305013522077.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-352-2077.
-
MPN or Model
03A161-5-21
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.459 inches and 0.479 inches -
Fastener Length
Between 1.766 inches and 1.796 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-336-3215 MPN VCL0008-3D4PClose Tolerance Screw
- 5305-01-435-0460 MPN BACB30LU14-53XClose Tolerance Screw
- 5305-01-600-3722 MPN 3M1277E3D15AMachine Screw
- 5306-00-121-6669 MPN BACB30FD5H4Shear Bolt
- 5306-00-357-1900 MPN VAL23029-5-28Close Tolerance Bolt
- 5306-00-723-9471 MPN VAL21013-12100Shear Bolt
- 5306-01-030-1765 MPN ST3M729-5D13Close Tolerance Bolt
- 5306-01-044-5192 MPN VAL23607-3-9Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-352-2077 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A161-5-21 | Northrop Grumman Systems Corporation |
SLB217-5-21 | Space-lok, Inc. |
03A161-5-21 | Northrop Grumman Systems Corporation |
VCL0008-5-21 | Valley-todeco, Inc. |
AIC4410-5-21 | Sps Technologies, Llc |
PBF1419-5-21 | Sps Technologies, Llc |
HR242-5-21 | Hi-shear Corporation |
123741-5-21 | Sps Technologies, Llc |
X007-5-21 | Huck International, Inc. |
HR242-5-21 | Lisi Aerospace Canada Corp |
X007-5-21 | Huck Intl Inc |