NSN 5305-01-352-2747
High Torque Screw
Between 0.580 inches and 0.610 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number HR239-3-4 for national stock number 5305013522747.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-352-2747.
-
MPN or Model
HR239-3-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 0.580 inches and 0.610 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5737 assn standard single material response or ams5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-004-5165 MPN 51B223-8Close Tolerance Screw
- 5305-00-310-5301 MPN AIC811-08-7Socket Head Cap Screw
- 5305-00-310-6062 MPN AIC813-06R5Machine Screw
- 5305-00-316-7488 MPN AIC812-02-5Machine Screw
- 5305-01-004-9520 MPN 965817-107CSocket Head Cap Screw
- 5305-01-051-5506 MPN AIC985-3D7PClose Tolerance Screw
- 5305-01-101-6027 MPN AIC811-04-47Socket Head Cap Screw
- 5305-01-105-1809 MPN 3M925C4-9DClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-352-2747 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR239-3-4 | Hi-shear Corporation |
HR239-3-4 | Lisi Aerospace Canada Corp |
E0008-3-4 | Huck International, Inc. |
E008-3-4 | Huck International, Inc. |
BF0015HC3-3-4 | Lfc Industries Inc. |
E0008-3-4 | Huck Intl Inc |
E008-3-4 | Huck Intl Inc |
AIC1651-3-4 | Sps Technologies, Llc |
SC3103-3-4 | Arconic Global Fasteners & Rings, |
PBF1416-3-4 | Sps Technologies, Llc |
123742-3-4 | Sps Technologies, Llc |
SLB216-3-4 | Space-lok, Inc. |
03A173-3-4 | Northrop Grumman Systems Corporation |