NSN 5305-01-352-8140
High Torque Screw
Between 1.050 inches and 1.080 inches fastener length, flat countersunk head style, between 0.464 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number PBF1476-4D11P for national stock number 5305013528140.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-352-8140.
-
MPN or Model
PBF1476-4D11P
-
Schedule B
8105.90.0000 (Cobalt, wrought, and articles thereof) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.377 inches -
Fastener Length
Between 1.050 inches and 1.080 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.071 inches first hole and 0.081 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.806 inches first hole -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Cobalt comp mp-35-n -
Material Specification
Ams 5844 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-003-1582 MPN 128EC60046-3Aircraft Thermal Insulation Pipe Covering
- 1560-00-075-3600 MPN 123C10208-1Pushrod Spring Asse
- 5935-00-173-9868 MPN GA800RH18-5Electrical Connector Backshell
- 5985-00-187-5574 MPN 123SCAV5600-1Waveguide Assembly
- 1560-00-196-4450 MPN 1128B40232-5Aircraft Door
- 5935-00-214-1434 MPN GA800NB10-4Electrical Connector Backshell
- 5935-00-261-8056 MPN GC800NE20-2PElectrical Plug Connector
- 1560-00-278-3770 MPN 123WM10010-20Fitting Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-352-8140 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1476-4D11P | Sps Technologies, Llc |
GB510FH4D11P | Northrop Grumman Systems Corporation |
124380-4-11CD | Sps Technologies, Llc |