NSN 5305-01-353-6898
High Torque Screw
Between 0.735 inches and 0.765 inches fastener length, flat countersunk head style, 0.328 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number 03A174-3-12 for national stock number 5305013536898.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-353-6898.
-
MPN or Model
03A174-3-12
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 0.735 inches and 0.765 inches -
Head Style
Flat countersunk -
Head Diameter
0.328 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.405 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4928 assn standard single material response or ams4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-186-9221 MPN AIC82-4-30Close Tolerance Screw
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-01-047-8822 MPN 53B336-6Close Tolerance Screw
- 5305-01-174-2708 MPN 51B650-3-5Machine Screw
- 5305-01-185-7163 MPN LD111-0047-2405Close Tolerance Screw
- 5305-01-386-2977 MPN AIC1700-5-12Close Tolerance Screw
- 5305-01-512-8274 MPN TX1027C4-9AFClose Tolerance Screw
- 5305-01-512-8356 MPN TX1027C3-8AFClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-353-6898 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A174-3-12 | Northrop Grumman Technical Services, |
HR240-3-12 | Hi-shear Corporation |
03A174-3-12 | Northrop Grumman Systems Corporation |
03A174-3-12 | Sps Technologies, Llc |
HR240-3-12 | Lisi Aerospace Canada Corp |
SC3102-3-12 | Arconic Global Fasteners & Rings, |
PBF1417-3-12 | Sps Technologies, Llc |
123743-3-12 | Sps Technologies, Llc |
03A174-3-12 | Sps Technologies Inc |