NSN 5305-01-354-1915
Bolt Stove
Between 1.814 inches and 1.844 inches fastener length, flat countersunk head style, between 0.703 inches and 0.762 inches head diameter, internal drive style: high-torque.
Manufacturer part number NAS1221-6-20 for national stock number 5305013541915.
Datasheet
-
Product description
Machine Screw NSN 5305-01-354-1915.
-
MPN or Model
NAS1221-6-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.579 inches -
Fastener Length
Between 1.814 inches and 1.844 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.703 inches and 0.762 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Screw Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-900-2408 MPN NAS705C1Stud Terminal
- 5940-01-439-4145 MPN NAS1063A14-1HTerminal Board Marker Strip
- 5305-00-006-8306 MPN NAS1100E06-4PMachine Screw
- 5305-00-007-3020 MPN NAS1102C02-4PMachine Screw
- 5305-00-008-9115 MPN NAS1190C02T7LSocket Head Cap Screw
- 5305-00-053-8077 MPN MS24677-104Socket Head Cap Screw
- 5305-00-061-0266 MPN MS51029-50Setscrew
- 5305-00-082-6785 MPN NAS1100C06-14BMachine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-354-1915 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1221-6-20 | National Aerospace Standards |
Stock Check
- NS: 29
- NE: 3237