NSN 5305-01-355-1429
High Torque Screw
Between 0.632 inches and 0.662 inches fastener length, flat countersunk head style, between 0.464 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number LD111-0044-2404 for national stock number 5305013551429.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-355-1429.
-
MPN or Model
LD111-0044-2404
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.372 inches and 0.422 inches -
Fastener Length
Between 0.632 inches and 0.662 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq+35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-197-7487 MPN 168-52414Rudd Cable Assembly
- 1560-00-477-9355 MPN 151-48845Fuel Tube Assembly
- 1560-00-566-1955 MPN 170-53083-50Control Stick Boot Assembly
- 1560-00-971-4648 MPN 176-53341-21Heat Vent Tube
- 1560-01-152-3895 MPN 175-48314Housing Assy
- 1560-01-175-1942 MPN L6311069-021Aircraft Structural Component Support
- 1560-01-189-2812 MPN L3022196-041Aircraft Access Door
- 1560-01-225-2951 MPN L3226649-001Aircraft Access Door
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-355-1429 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-2404 | Boeing Company, The |