NSN 5305-01-356-3189
High Torque Screw
Between 1.140 inches and 1.170 inches fastener length, oval countersunk head style, between 0.469 inches and 0.474 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number LD111-0047-0511 for national stock number 5305013563189.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-356-3189.
-
MPN or Model
LD111-0047-0511
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.467 inches -
Fastener Length
Between 1.140 inches and 1.170 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.469 inches and 0.474 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.312 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq+35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-850-3010 MPN NAS1102-04-3Machine Screw
- 5305-01-004-9520 MPN 965817-107CSocket Head Cap Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-054-6246 MPN AIC9535-7-16Close Tolerance Screw
- 5305-01-107-0036 MPN AIC984-6-36Close Tolerance Screw
- 5305-01-138-2658 MPN 3M893-4-9Machine Screw
- 5305-01-202-8325 MPN BACS12CK3U16Machine Screw
- 5305-01-278-5075 MPN AIC985-6-8Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-356-3189 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0047-0511 | Boeing Company, The |
LD111-0047-0511 | Sps Technologies, Llc |
LD111-0047-0511 | Arconic Global Fasteners & Rings, |
LD111-0047-0511 | Sps Technologies, Llc |
LD111-0047-0511 | Sonic Industries Inc. |
LD111-0047-0511 | Hi-shear Corporation |
LD111-0047-0511 | Sps Technologies, Llc |