NSN 5305-01-356-3667
High Torque Screw
2.875 inches fastener length, flat countersunk head style, 1.201 inches head diameter, grip diameter: between 0.623 inches and 0.624 inches .
Manufacturer part number AIC986-10-46 for national stock number 5305013563667.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-356-3667.
-
MPN or Model
AIC986-10-46
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.990 inches and 1.020 inches -
Fastener Length
2.875 inches -
Head Style
Flat countersunk -
Head Diameter
1.201 inches -
Grip Diameter
Between 0.623 inches and 0.624 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
End Application
Pacer dawn -
Thread Diameter
0.625 inches -
Grip Length
Between 2.865 inches and 2.885 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 federal specification single treatment response -
Thread Series Designator
Unj
More from these suppliers
- 5305-00-186-9221 MPN AIC82-4-30Close Tolerance Screw
- 5305-00-818-1895 MPN AIC813-00-4Machine Screw
- 5305-00-928-9538 MPN C387H4-16Machine Screw
- 5305-01-254-2565 MPN 3M963-4L8Close Tolerance Screw
- 5305-01-347-9809 MPN AIC4410-5-12PClose Tolerance Screw
- 5305-01-347-9810 MPN AIC4410-5-14PClose Tolerance Screw
- 5305-01-365-0402 MPN BACB30LR4-5Close Tolerance Screw
- 5305-01-386-2933 MPN AIC1700-5-9Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-356-3667 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC986-10-46 | Sps Technologies, Llc |
VT1695-10-46 | Arconic Global Fasteners & Rings, |
PBF1196-10-46 | Sps Technologies, Llc |
121711-10-46 | Sps Technologies, Llc |
VT1695-10-46 | Alcoa Global Fasteners, Inc. |
H1861-10-46 | Huck Intl Inc |
5306-006-10-46 | Aidc/aerospace Industrialdevelopment |
H1861-10-46 | Huck International, Inc. |