NSN 5305-01-356-7209
High Torque Screw
Between 0.642 inches and 0.672 inches fastener length, flat countersunk head style, between 0.328 inches and 0.338 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 03A173-3-5 for national stock number 5305013567209.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-356-7209.
-
MPN or Model
03A173-3-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
095190 - Hardware, NOI -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 0.642 inches and 0.672 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.338 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 fastener -
Material Specification
Ams5737 assn standard 1st material response fastener or ams5731 assn standard 2nd material response fastener -
Surface Treatment
Passivate fastener -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response fastener -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-197-6204 MPN NAS1101-04-5BMachine Screw
- 5305-00-802-2667 MPN 51B222-18HMachine Screw
- 5305-00-823-5808 MPN NAS1102-06-12Machine Screw
- 5305-00-975-1760 MPN A1C792-4-9Machine Screw
- 5305-01-014-8314 MPN NAS1101E08-10Machine Screw
- 5305-01-022-0114 MPN AIC617-24Externally Relieved Body Screw
- 5305-01-054-6235 MPN C9535-6-17Close Tolerance Screw
- 5305-01-381-2172 MPN 1701-3-13Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-356-7209 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A173-3-5 | Northrop Grumman Systems Corporation |
SC3103-3-5 | Arconic Global Fasteners & Rings, |
123742-3-5 | Sps Technologies, Llc |
HR239-3-5 | Hi-shear Corporation |
AIC1651-3-5 | Sps Technologies, Llc |
E008-3-5 | Huck International, Inc. |
PBF1416-3-5 | Sps Technologies, Llc |
BF0015HC3-3-5 | Lfc Industries Inc. |
HR239-3-5 | Lisi Aerospace Canada Corp |
E008-3-5 | Huck Intl Inc |
SLB216-3-5 | Space-lok, Inc. |
03A173-3-5 | Northrop Grumman Systems Corporation |