NSN 5305-01-357-9350
High Torque Screw
Between 1.074 inches and 1.104 inches fastener length, flat countersunk head style, 0.381 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number NAS663V12 for national stock number 5305013579350.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-357-9350.
-
MPN or Model
NAS663V12
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.314 inches and 0.364 inches -
Fastener Length
Between 1.074 inches and 1.104 inches -
Head Style
Flat countersunk -
Head Diameter
0.381 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
101.0 degrees -
Material
Titanium alloy -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-496-7171 MPN MS27488-20Electrical Connector End Seal Plug
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5305-00-003-9278 MPN NAS1221-4E42Machine Screw
- 5305-00-005-0429 MPN MS51975-51Shoulder Screw
- 5305-00-006-8306 MPN NAS1100E06-4PMachine Screw
- 5305-00-014-4723 MPN MS51861-14Tapping Screw
- 5305-00-051-7352 MPN NAS1351C06H6Socket Head Cap Screw
- 5305-00-054-9328 MPN MS24694C342Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-357-9350 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS663V12 | National Aerospace Standards |