NSN 5305-01-359-1470
Bolt Stove
Between 1.360 inches and 1.380 inches fastener length, flat countersunk head style, between 0.207 inches and 0.225 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number 349464-1 for national stock number 5305013591470.
Datasheet
-
Product description
Machine Screw NSN 5305-01-359-1470.
-
MPN or Model
349464-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
133300 - Machinery/machines NOI -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.243 inches and 1.313 inches -
Fastener Length
Between 1.360 inches and 1.380 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.207 inches and 0.225 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel comp 302 or steel comp 302b or steel comp 303 or steel comp 303 plus x or steel comp 303se or steel comp 303cu or steel comp 303ma or steel comp 304 or steel comp 304l -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5930-00-111-8284 MPN 46-018411-03Push Switch
- 4920-00-886-0248 MPN 9516Jackscrew
- 4920-00-911-3013 MPN 59227S Template Assembly
- 5905-00-982-6565 MPN 74869Nonprecision Wire Wound Variable Resistor
- 5935-01-026-2222 MPN 2107-0004-015Electrical Plug Connector
- 5985-01-049-3692 MPN 311800-1Antenna
- 5930-01-217-8618 MPN 333404-9Push Switch
- 5930-00-111-8288 MPN 46-018411-08Push Switch
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-359-1470 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
349464-1 | Northrop Grumman Systems Corporation |
349464-1 | Northrop Grumman Systems Corporation |
349464-1 | Northrop Grumman Systems Corporation |