1-321-802-5889
Email Us

NSN 5305-01-359-8005

High Torque Screw

About this product

Between 2.036 inches and 2.066 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .

Manufacturer part number NAS1580A3T27D for national stock number 5305013598005.

Datasheet

  • Product description

    Close Tolerance Screw NSN 5305-01-359-8005.

  • MPN or Model

    NAS1580A3T27D

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    0.363 inches
  • Fastener Length
    Between 2.036 inches and 2.066 inches
  • Head Style
    Flat countersunk
  • Head Diameter
    Between 0.339 inches and 0.381 inches
  • Grip Diameter
    Between 0.1885 inches and 0.1895 inches
  • Shank Unthreaded Hole Diameter
    0.070 inches first hole and 0.080 inches first hole
  • Internal Drive Style
    Offset cruciform (torque set)
  • Thread Diameter
    0.190 inches
  • Grip Length
    Between 1.678 inches and 1.698 inches
  • Thready Qty Per Inch (tpi)
    32
  • Min. Tensile Strength (psi)
    160000 pounds per square inch
  • Countersink Angle
    Between 99.0 degrees and 101.0 degrees
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    1.910 inches first hole and 1.960 inches first hole
  • Material
    Steel comp 4140 or steel comp e4340 or steel comp 8740
  • Surface Treatment
    Cadmium and chromate
  • Thread Series Designator
    Unjf
  • Specification Data
    80205-nas1580 professional/industrial association standard
More from these suppliers
Close Tolerance Screw

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Mechanic Bill explains High Torque Screw

Pricing and Availability

Get a quote for 5305-01-359-8005 close tolerance screw
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5305013598005

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
NAS1580A3T27D National Aerospace Standards
NAS1580A3T27D National Aerospace Standards
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.