NSN 5305-01-360-7872
High Torque Screw
Between 2.890 inches and 2.937 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number NAS334CP27 for national stock number 5305013607872.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-360-7872.
-
MPN or Model
NAS334CP27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 2.890 inches and 2.937 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Internal Drive Style
Cross recess type ii -
Thread Diameter
0.250 inches -
Grip Length
2.500 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.562 inches first hole -
Surface Finish
32.0 microinches grip32.0 microinches threads -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-8844 military specification 2nd material response or ams6414 assn standard 2nd material response or mil-s-6-49 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas334 professional/industrial association standard
More from these suppliers
- 5940-00-228-4291 MPN NAS1744-8Conductor Splice
- 5975-01-149-8889 MPN NAS1544-2A1Electrical Wall Plate
- 5940-01-393-8969 MPN NAS1063A2-TB107BUTerminal Board Marker Strip
- 5305-00-004-5099 MPN NAS662C2LLR16Socket Head Cap Screw
- 5305-00-005-5921 MPN NAS514P632-28PMachine Screw
- 5305-00-007-2951 MPN NAS1100E01-7Machine Screw
- 5305-00-007-6171 MPN NAS1743C4T8USocket Head Cap Screw
- 5305-00-008-2104 MPN NAS1100C02-6PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-360-7872 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS334CP27 | National Aerospace Standards |