NSN 5305-01-360-9142
Panel Screw
Between 0.540 inches and 0.560 inches fastener length, undercut pan no. 2 head style, between 0.256 inches and 0.270 inches head diameter, head height: between 0.072 inches and 0.082 inches .
Manufacturer part number 90009A1126-1 for national stock number 5305013609142.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-360-9142.
-
MPN or Model
90009A1126-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.222 inches and 0.242 inches -
Fastener Length
Between 0.540 inches and 0.560 inches -
Head Style
Undercut pan no. 2 -
Head Diameter
Between 0.256 inches and 0.270 inches -
Head Height
Between 0.072 inches and 0.082 inches -
First Diameter From Head
Between 0.094 inches and 0.096 inches -
Internal Drive Style
Slot -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
40.0 rockwell c and 47.0 rockwell c -
Minimum Yield Strength
170000 pounds per square inch -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 630 -
Material Specification
Mil-c-24111 military specification single material response -
Surface Treatment
Oxide -
Surface Treatment Specification
Mil-c-13924 military specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-01-561-4096 MPN 206056Electrical Receptacle Connector
- 5985-01-599-9992 MPN 09017A3150-01Antenna Support Base
- 5305-01-408-4890 MPN 93013A3106Tapping Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-360-9142 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
90009A1126-1 | Marine Corps Logistics Command |