NSN 5305-01-361-7041
Panel Screw
Between 0.438 inches and 0.500 inches fastener length, undercut pan no. 2 head style, 0.250 inches head diameter, head height: 0.125 inches .
Manufacturer part number 131A789-1 for national stock number 5305013617041.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-361-7041.
-
MPN or Model
131A789-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.282 inches -
Fastener Length
Between 0.438 inches and 0.500 inches -
Head Style
Undercut pan no. 2 -
Head Diameter
0.250 inches -
Head Height
0.125 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.188 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
Between 0.040 inches and 0.050 inches -
Point Style
Flat -
Internal Drive Style
Slot -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 303cu or steel comp 303ma or steel comp 303 plus x or steel comp 303 -
Surface Treatment
Passivate -
Surface Treatment Specification
Mil-f-14072 military specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-484-5071 MPN 6083820Electrical Plug Connector
- 5950-01-337-6422 MPN 107A980-1Discriminator Transformer
- 4920-01-443-0260 MPN 205A414-1Aircraft Maintenance Template
- 1560-01-524-8903 MPN 241A663-102Aircraft Structural Component Web
- 5935-01-555-7343 MPN 262A676-15Electrical Connector Backshell
- 5905-01-629-9513 MPN R0603F2700JFilm Fixed Chip Resistor
- 5905-01-630-2415 MPN R0402F76R8JFilm Fixed Resistor
- 5950-01-483-0912 MPN 230A228Radio Frequency Coil
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-361-7041 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
131A789-1 | Lockheed Martin Corporation |